Products

Trina NEG9RC.27/440Wp Bifazial Black Frame          Small dimensions, high outputUp to 440 W peak power, 22.0 % module efficiencyBifaciality factor up to 85 %Better temperature behaviour at high ambient temperatures for more powerTransparent double glazing conceptDeveloped with a focus on aestheticsExcellent resistance to fire and difficult environmental conditions 5,400 Pa shear load and 4,000 Pa wind load (test loads)Universal solution for residential and commercial roofsHigh compatibility with available inverters, optimisers and mounting systemsEasy handling thanks to perfect size and low weightTechnical data:  Module efficiency: 22.0 %Number of cells: 144Cell type: monocrystallineCable length: 1100 mm (+) / 1100 mm (-)Connector system: MC4-EVO2Frame colour: blackFrame height: 30 mmModule width: 1134 mmModule length: 1762 mmPressure load front: 6000 paRear pressure load: 4000 paPower tolerance (positive): 0-5 WpweightOperating temperature; -40 to 85 °CExtended warranty for Vertex S1 % Max. Degradation in year 1 0.4 % Max. annual degradation in years 2-3025 year product guarantee on workmanship30 year performance guarantee

Trina Vertex S+ 445Wp Fullblack Glass-Glass TSM-NEG9R.25          Small dimensions, high outputUp to 445 W peak power22.3 % module efficiency with high-density cell connection technologyBetter temperature behaviour at high ambient temperatures for more power Lower installation costs with increased power and efficiencyDouble glass for maximum reliabilityExcellent resistance to fire and difficult environmental conditions5,400 Pa shear load and 4,000 Pa wind load (test loads) 25-year product guarantee on workmanship and 30-year performance guaranteeUniversal solution for residential and commercial roofsHigh compatibility with available inverters, optimisers and mounting systemsEasy handling thanks to perfect size and low weightFlexible installation solutions for system use Developed with a focus on aestheticsTrina Solar relies on an award-winning, all-black designTechnical data: Module efficiency: 22.3 %Number of cells: 144 Cell type: monocrystallineTechnology: monofacialCable length: 1100 mm (+) / 1100 mm (-) Connector system: MC4-EVO2 Frame colour: black Frame height: 30 mm Module width: 1134 mmModule length: 1762 mmFront pressure load: 5400 paRear pressure load: 4000 pa Power tolerance (positive): 0-5 WpWarranty: 25 years

Aiko 455Wp A-MAH54Db N-Type ABC Neostar 2S+ Gen. 2 Glass-Glass Full BlackHigher power outputUp to 455 W peak power, 22.8% module efficiencyLow degradation: 1st year≤1.0%, linear degradation ≤0.35%Better temperature coefficient: -0.26%/ ℃Partial shading optimisationLower cell temperature during shadingResistance to microcracksBalance of System (BOS) Major savings in cabling assembly design and labour costs. Lower operating and maintenance costsHigh temperature reduction and micro-crack resistance, free of front contacts, ensuring roof safety and reducing the likelihood of module failure. Technical data: Module efficiency: 22.8 %Number of cells: 108Cell type: N-type ABC Cable length: 1200 mm (+) / 1200 mm (-)Connector system: MC4-EVO2Frame colour: black Frame height: 30 mmModule width: 1134 mmModule length: 1757 mm Pressure load front: 5400 paRear pressure load: 2400 paPower tolerance (positive): 0-3 %Operating temperature: -40 °C to 85 °C  Warranty: 25 year product warranty 30 years performance guarantee 

Sungrow HYBRID inverter SH10.0RT FLEXIBLE APPLICATIONWide battery voltage rangeSupports parallel connection with master-slave controllingProvides 100% power to unbalance loads in backup modeENERGY INDEPENDENCEAlmost seamless transition to backup mode to protect against power outages Fast charging/discharging for easy equalisation of consumption peaksINTELLIGENT MANAGEMENTHigh level of self-consumption thanks to optimised integrated EMSFree online monitoring to improve energy management for end users and the installerRemote firmware update and customisable settingsEASY INSTALLATION Unique connectors for time-saving installationOnline commissioning with smartphoneLightweight and compactTECHNICAL DATA:PV inputDimensions: 460 x 540 x 170 mmWeight: 27 kgRecommended max. PV input power: 15.000 WMax. PV input voltage: 1.000 VMin. PV input voltage / switch-on voltage: 250 VNominal PV input voltage: 600 V MPPT voltage range: 200 V - 950 VMPP voltage range at rated power: 280 V - 850 VNo. of MPPTs: 2No. of PV strings per MPPT: 1 / 2Max. PV input current: 37.5 A (12.5 A / 25 A)Short-circuit current of the PV input: 48 A (16 A / 32 A)Max. Current per input connector: 16 AAC input and output:Max. AC input power from the grid: 20.600 WRated AC output power: 10.000 WRated AC output current: 14.5 AMax. AC output apparent power: 10.000 VA Max. AC output current: 15.2 AAC voltage range: 270 - 480 V

Sungrow HYBRID inverter SH15T-V11  FLEXIBLE USE Wide battery voltage rangeSupports parallel connection with full communication between inverters 100% unbalanced load possible in backup mode ENERGY INDEPENDENCE Almost seamless transition to backup mode to protect against power outages fast charging/dischargingfor easy equalisation of consumption peaks INTELLIGENT MANAGEMENT High level of self-consumption thanks to optimised integrated EMSFree online monitoring to improve energy management for end users and the installerRemote firmware update and customisable settings SIMPLE INSTALLATIONUnique connectors for time-saving installationOnline commissioning with smartphoneLightweight and compact TECHNICAL DATA:  PV inputDimensions: 620 x 480 x 245 mmWeight: 38 kgRecommended max. PV input power: 30.000 WpMax. PV input voltage: 1.000 VMin. PV input voltage / switch-on voltage: 150 VNominal PV input voltage: 600 V MPPT voltage range: 150 V - 950 VMPP voltage range at rated power: 150 V - 950 VNo. of MPPTs: 3No. of PV strings per MPPT: 2/ 2 / 1Max. PV input current: 80 A (32 A / 32 A/ 16 A) Short-circuit current of the PV input: 100 A (40 A / 40 A / 20 A)Max. Current per input connector: 30 AAC input and output:Max. AC input power from the grid: 43.000 VARated AC output power: 15.000 WMax. AC output apparent power: 15.000 VA Max. AC output current: 22.8 ABattery data: Battery type: Lithium-ion battery Voltage range of the battery: 100 - 700 V Max. Charge/discharge current: 50 A / 50 A Max. Charging/discharging power: 30000 W / 15000 W

Sungrow SBR Premium Accessories (BMS)Sungrow SBR Battery Accessories Kit is a storage solution from 6.4 kWh to 25.6 kWh. The system can be installed quickly and easily thanks to the base with adjustable feet and the simple, cable-free stack assembly.Technical data:Protection class: IP55 (when installed)Dimensions: 155 x 625 x 330 mm (H x W x D)Weight: 15 kgScope of delivery:1x battery base1x Upper battery cover 1x battery control unit1x bracket 1x wiring harness1x bolt 2x set of expansion plugs4x feet6x M5 screws4x sets of M5 screws2x washers M6 1x documentation In order to integrate the BMS, an additional empty housing is required if only two memory modules are used.

Sungrow SBR Battery Module Premium 3.2 kWhThe Sungrow SBR is a modular high-voltage battery system that is ideal for your solar system and offers a usable storage capacity of 3.20 kWh. The storage system can be flexibly expanded with up to 8 modules. Each module delivers 3.20 kWh of power, weighs just 33 kg and boasts a sleek, attractive design. Thanks to the plug-and-play system, installation can be carried out easily by just one person. Advantages of the Sungrow battery system: High performance Continuous charging and discharging current up to 30 A with high efficiencyAlmost 100 % of the energy can be utilisedSafetyEquipped with a lithium iron phosphate battery Multi-level safety concept and extensive certificationsFlexibilityModularly expandable throughout the entire service life Supports 3 to 8 modules per unit, maximum 4 units in parallel, with a capacity of 9 to 100 kWh Simple installationLightweight and compact, can be installed by just one personPlug & play: no cabling required between the battery modules Technical data: Weight: 33 kgDimensions: 625 x 130 x 330 mm Battery capacity: 3.20 kWhType: High-voltage lithiumProtection class: IP55Colour: WhiteWarranty: 10 years Scope of delivery:1x battery module1x side cover 2x M5 screws 

Huawei SUN2000-10KTL-M1 Hybrid Inverter High CurrentThe Huawei SUN2000-10KTL-M1 inverter is one of the lightest and most compact hybrid devices on the market. It impresses with its extremely high European efficiency and offers a wide range of useful functions. These include AI-supported protection against arcing, precise localisation of arcing faults for rapid rectification and numerous other practical features.The device impresses with its durability, as only high-quality, long-lasting components have been used. Thanks to the innovative operation via an app, no display or additional operating elements are required, which keeps the design sleek and modern. The device can be conveniently set up using a smartphone or other compatible device, which makes commissioning intuitive and straightforward.The Huawei SUN2000-10KTL-M1 is already prepared for additional battery charging via AC power sources and for the use of a backup (in combination with an additional backup box), which further simplifies operation. A particular highlight is the option for remote maintenance and automatic updates. Thanks to these functions, the inverter is rightly regarded as one of the most user-friendly devices for newcomers to photovoltaics.Product features:Phase: 3MPP tracker: 2Recommended maximum PV power 15000 WpOpen circuit voltage: 41.10 VVoltage range: 140 V ~ 980 VCommunication: RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G / 3G / 2G via Smart Dongle-4G (optional)Display: LED indicators; Integrated WLAN + FusionSolar appHigh efficiency of up to 98.6%IP65 water protectedCooling: Convection coolingDimensions: 525x470x146.5mmWeight: 17kgWarranty: 10 years

The LUNA2000 has 5 - 30 kWh usable storage capacity, 2.5 kW discharge power per module and 5kW discharge power per tower. It is compatible with all HUAWEI SUN2000 L1 and M1 inverters up to 10 kW. An emergency power function on one phase is possible via the separately available Huawei backup box. In the LUNA2000 storage packages, energy optimisers are already integrated in each storage module. This means that additional modules can be retrofitted at any time. The lithium iron phosphate cells are 100% dischargeable, have a high output and are characterised by a high level of intrinsic safety. The safety concept of the Luna is certified according to VDE2510-50. Initial commissioning is very quick and easy with the FusionSolar APP. Further configuration and maintenance can be carried out conveniently from the office via the portal.The system can be used both as a free-standing device and for wall mounting and has a depth of just 150 mm. The status display is designed as an LED and is easy to understand.Technical details: Connection: MC4 Usable capacity: 10000.0 Wh Number of cells: 1 pieceWeight. 100 kgDimensions: 150 x 670 x 960 mmCell technology: Lithium iron phosphate (LiFePO4)Multi-stage safety concept Your benefits: Fully modular system that can be expanded at any time from 5 to 30 kWh Energy optimiser for each battery unit Flexible installation (shallow depth of 150 mm)Quick commissioning and configuration via APP 

HUAWEI LUNA2000 - Wall bracketThe wall bracket for LUNA2000 facilitates integration into existing systems and ensures that the battery storage system is securely mounted on the wall. Made of high-quality and robust material, it offers a reliable solution for securely mounting your battery storage system. This wall bracket ensures proper installation of the LUNA2000 battery storage system and effectively minimises the risk of damage.Technical details: Length 690 x 255 x 185 mm Weight: 6.6 kg

Smart Meter Huawei DTSU666-H 3ph 3x100A Sensors The Huawei Smart Power Sensor DTSU666-H is a three-phase current sensor for use in solar systems. The component processes a voltage of 176 to 288 volts and impresses with a very low power consumption of less than one watt. Installation is simple, easy and straightforward. Once the sensor is integrated, it displays the performance data on the built-in LCD screen and can also be operated effortlessly. In addition, the Huawei Smart Power Sensor DTSU666-H supports communication via RS485, meaning it can also be read out from another location. It uses the Modbus-RTU communication protocol for this purpose.Another outstanding feature of the current sensor is its enormous precision. The measuring accuracy of the voltage is +/-0.5 %, the fluctuation in frequency is 0.01 Hz, and the sensor measures current, power and energy with a maximum deviation of +/-1 %. This ensures classification in accuracy class >1. The other technical data should also be noted. The sensor is housed in a casing measuring 100 x 72 x 65.5 mm and weighs 1.5 kg, including cabling. This enables the compact element to be accommodated in a space-saving manner. The possible operating temperature is between -25 °C and +60 °C, the component tolerates a relative humidity of 5 % to 95 %. Current can be measured up to 250 A. The scope of delivery includes three hinged current transformers with a cable length of 5 m and an RS485 cable with a length of 10 m. Product information:3-phase Smart Power Sensor 176-288 Volt VoltageAccuracy class > 1 Simple operation via LCD displayPower consumption ≤1 WCommunication via RS485 Huawei Smart Power Sensor DTSU666-H - General data:Operating temperature range: -25°C ~ +60 °C Relative humidity: 5 % RH~ 95 % RHDimensions (W x D x H): 100 x 72 x 65.5 mm Mounting type: DIN35 DIN railWeight (including cable): 1.5 kgPower grid type: 3P4W (3-phase)Input voltage: 176 VAC~288 VAC (Phase / N) Power consumption: ≤ 1 WCommunication: RS485 Huawei Smart Power Sensor DTSU666-H - Communication Interface: RS485 Baud rate: 9,600 bps Communication protocol: Modbus-RTU Huawei Smart Power Sensor DTSU666-H - Measuring range:mains voltage phase-to-phase: 304 Vac ~ 499 Vacphase-to-phase voltage: 176 Vac ~ 288 Vaccurrent: 0 ~ 100 A Huawei Smart Power Sensor DTSU666-H - Measuring accuracy:voltage: ±0.5 % current/ power/ energy: ±1 %frequency: ±0. 01 Hz Huawei Smart Power Sensor DTSU666-H - Environmental conditions:Operating temperature: -25 ℃ ~ +60 ℃Storage temperature: -40 ℃ ~ +70 ℃ Operating humidity: 5 %RH ~ 95 %RH (non-condensing) Huawei Smart Power Sensor DTSU666-H - Included in delivery: 3x hinged current transformers (5 m cable length)RS485 (10 m cable length)

This BMS Master Box from Solax is the master unit of the Solax T30 battery system (top-mounted system) and is the right choice for larger charging cycles in particular. In addition, the strength of this system lies in the fact that you can use the batteries (T30) up to 100% of their capacity. The system can be expanded as required:Decide how large you want your memory to be. With this system, you have the option of changing the memory size as you wish. It is also possible to expand the storage system at a later date. From an extension of 3x T30 battery units, an additional connection cable and the accessory pack are required. Choose your desired electricity storage size depending on your storage requirements:Optional storage units:1x T30(HV10230) = 3,0 kWh2x T30(HV10230) = 6,0 kWh3x T30(HV10230) = 9,0 kWh + additional connection cable + accessory pack4x T30(HV10230) = 12,0 kWh + additional connection cable + accessory packThe advantages of the Solax Master Box MC0600 are:Extension possible at any timeIncrease self-consumptionProtection against power failureCompatible with leading high-voltage batteriesVery high efficiencySimple installation and maintenanceSimple limitation of grid feed-in and battery chargingAlso suitable for outdoor use (protection class IP 65)Simple, user-friendly design and operationScope of delivery:1x Solax Master Box MC06001x operating instructions

The Solax battery module T30 TP-HV10230, LiFePo4, 3.0 kWh is the storage unit of the Solax Triple Power battery system (top-mounted system) and is particularly ideal for larger charging cycles. The system also offers the advantage that the storage capacity can be expanded as required. Special features:Systematic design, thorough optimization and seamless connection with the Solax hybrid inverterUnique battery heating technology that can operate at low temperatures [1]Safest type of LiFePO battery, an adoption of high-performance processorsModular stacking design, easy installation, floor and wall mounting supportedAuto Power Replenishment technology is used to prevent deep discharge of the batteryProtection class IP65, supports indoor and outdoor installationOnline fault diagnosis, upgrade and maintenanceMultiple communication interfaces: RS485, CANInternational brand appliances, better stabilityLong life cycle, more than 6,000 timesSafety according to TÜV, CE, UN38.3 and so on[1] With hybrid G4 inverterThe system can be expanded as required:You can choose how large you want your memory to be. With this system, you have the option of changing the memory size as you wish. It is also possible to expand the memory at a later date. From an extension of 3x T30 battery modules, an additional connection cable and the accessory pack are required.Choose your desired electricity storage size depending on your storage requirements:Optional storage units:1x T30(HV10230) = 3,0 kWh2x T30(HV10230) = 6,0 kWh3x T30(HV10230) = 9,0 kWh + additional connection cable + accessory pack4x T30(HV10230) = 12,0 kWh + additional connection cable + accessory packThe advantages of the Solax battery unit T30 (HV10230) are:Utilize up to 100 % capacityExtension possible at any timeIncrease self-consumptionProtection against power failureCompatible with leading high-voltage batteriesVery high efficiencySimple installation and maintenanceSimple limitation of grid feed-in and battery chargingAlso suitable for outdoor use (protection class IP 65)Simple, user-friendly design and operation

Multifunctional energy meter!This multifunctional DTSU666 energy meter is an intelligent meter with a wide range of measurement and display options for 3-phase AC grids. This energy meter is the ideal measuring device for measuring active and reactive energy in systems with consumers and energy generators such as photovoltaic systems.Product information:LCD digit and character display with white-blue backlightingkWh daily totalizer (second, parallel-running totalizer freely resettable)Direct operation via buttons on the frontCan be used for single-phase alternating current networks in 2-wire systemsMeter readings (kWh) for import and export can be read directly, kVArh, V, A, W, Var, VA, PF, HzRS485 Modbus RTU communication interface (e.g. for the Solax Hybrid WR Gen.3 control unit)Technical data:Input: 3 phasesInput current: (max.) 80 AInput voltage: 230 V bei 50 HzOperating range: 176~276V ACBus type: RS485Protocol: Modbus-RTU (Modbus™ Word order)Protection class: IP51 (inside)Fire protection: self-extinguishing UL94V-0Scope of delivery:1x Solax | 3-PHASE METER | DTSU666/D-CHINT1x Operating instructions1x Assembly instructions

Features:Quick installation with "Plug & Play" functionIP 65 dust and waterproof designStable data transmission and good reliabilityEnvironmentally friendly and modern designDetails:Product name: Pocket LAN V3.0Supply voltage: +3,3 VIntervals for uploading data: 5 min.Ethernet: 10/100MWeight: 54g Dimensions: 123 x 29 x 42 mm Protection class: IP 65

Features:Quick installation with "Plug & Play" functionIP 65 dust and waterproof designStable data transmission and good reliabilityFlat design and attractive appearanceDetails:Product name: Pocket WifiModel: Pocket Wifi V3.0 Supply voltage: +3,3 V Frequency: 2,400~2,472 GHz Antenna amplification: 3dBi Intervals for uploading data: 5 Min. Protection class: IP 65 Dimensions: 82 x 40 x 24,5 mm Weight: 34g

Battery cable for connecting the Solax Triple Power battery T30 (4x)Scope of delivery:1x Solax Power connection cable 1.2 meters for 4x Solax Triple Power battery system T30

The powder-coated metal heaters have a very high heat utilisation value thanks to their specially coated surface. They are lightly textured, stove-enamelled in white and therefore very scratch-resistant and colour-fast. The heater has a particularly robust and durable heating element that heats the entire surface. Special thermal insulation makes our metal heater a highly efficient and sustainable heating system and reduces heat loss at the rear to a minimum.Whether tall, square or simply rectangular, our infrared heaters can be mounted in any position, even suspended from the ceiling. Thanks to the mounting mechanisms, they offer a stable, secure hold and can be individually customised thanks to the different frame profiles and colours.Technical data:Front: metal, stove-enamelledModel: metal Colour: white, RAL 9003 Surface: silk matt Dimensions: 59.2 x 119.2 cmVoltage: 1/N/PE 230 V Frequency: 50 Hz Protection class: IP 21 Protection category: I Heating technology: ESHC Connection cable: 1850 mm, white Schuko plug: yes Approval: TÜV

The flat, high-quality and permanently heat-resistant ESG safety glass of the infrared heater is – like the frame – available in all RAL colours in matt or glossy or can be used as a mirrored surface. All heater variants are available with or without a frame.Specifications:Dimensions: 120 x 60 cmHeating area: approx. 11-16 sqm Weight: 17.3 kgThickness: 21 mmWall distance: 30 mmRear wall made of galvanised metal housing2 built-in thermal safety switches each12 mm insulation to reduce the background temperatureConnection voltage 230 VSurface temperature max. 50 °C after 4 hours of continuous operationTechnical data:Front: 5 mm ESG-H safety glassVoltage: 1/N/PE 230 VFrequency: 50 HzProtection class: IP X4Protection category: IHeating technology: ESHCConnection cable: 1850 mm, whiteSchuko plug: yesApproval: VDE 

Heat sources with radiant warmth for your homeThe integrated dual heating system of the infrared bathroom radiators combines the convenience of energy-optimised towel drying in the lower part of the heater with powerful room heating in the upper part.Naturally, all radiators comply with Zone 2 (IPX4) requirements and can therefore be operated directly next to a shower or bathtub.Easy control via a single room thermostat, which centrally controls both heating zones of the dual heating system.Various towel rails can be attached (attachment possible on the left or right).Technical data: Front: metal, baked enamelColour: sandSurface: silk mattDimensions: 60 x 120 cmNumber of possible towel rails: 1Voltage: 1/N/PE 230 VFrequency: 50 HzProtection class: IP X4Protection class: IHeating technology: ESHC Plus, dual heating systemConnection cable: 1850 mm, whiteSchuko plug: yesMounting: wall

Heat sources with radiant warmth for your homeThe integrated dual heating system of the infrared bathroom radiators combines the convenience of energy-optimised towel drying in the lower part of the heater with powerful room heating in the upper part.Naturally, all radiators comply with Zone 2 (IPX4) requirements and can therefore be operated directly next to a shower or bathtub.Easy control via a single room thermostat, which centrally controls both heating zones of the dual heating system.Various towel rails can be attached (attachment possible on the left or right).Technical data:Front: metal, baked enamelColour: graphite blackSurface: silk mattDimensions: 60 x 120 cmNumber of possible towel rails: 1Voltage: 1/N/PE 230 VFrequency: 50 HzProtection class: IP X4Protection class: IHeating technology: ESHC Plus, dual heating systemConnection cable: 1850 mm, whiteSchuko plug: yesMounting: wall

Heat sources with radiant warmth for your homeThe integrated dual heating system of the infrared bathroom radiators combines the convenience of energy-optimised towel drying in the lower part of the heater with powerful room heating in the upper part.Naturally, all radiators comply with Zone 2 (IPX4) requirements and can therefore be operated directly next to a shower or bathtub.Easy control via a single room thermostat, which centrally controls both heating zones of the dual heating system.Various towel rails can be attached (attachment possible on the left or right).Technical data:Front: metal, baked enamelColour: whiteSurface: silk mattDimensions: 60 x 120 cmNumber of possible towel rails: 1Voltage: 1/N/PE 230 VFrequency: 50 HzProtection class: IP X4Protection class: IHeating technology: ESHC Plus, dual heating systemConnection cable: 1850 mm, whiteSchuko plug: yesMounting: wall

The infrared bathroom heaters from the BKW Plus series offer an unrivalled range of variants. In addition to numerous colours and sizes, the heaters can be fitted with solid and elegant towel rails in different lengths and surfaces.Formats:BEC0430   Surface: chrome, Type: open on one side, Dimensions (cm): 43,0 x 4,0 x 0,5BEC0550   Surface: chrome, Type: open on one side, Dimensions (cm): 55,0 x 4,0 x 0,5BEC0650   Surface: chrome, Type: open on one side, Dimensions (cm): 65,0 x 4,0 x 0,5BEC0430   Surface: brushed stainless steel, Type: open on one side, Dimensions (cm): 43,0 x 4,0 x 0,5BEC0550   Surface: brushed stainless steel, Type: open on one side, Dimensions (cm): 55,0 x 4,0 x 0,5 BEC0650   Surface: brushed stainless steel, Type: open on one side, Dimensions (cm): 65,0 x 4,0 x 0,5

Infrared dark radiators are very powerful and efficient heating devices with a discreet design. They are available in a classic and glass version. The very short heating-up phase and unobtrusive, invisible heat ensure perfect heating of semi-open terraces, loggias, verandas and balconies as well as conservatories, glass houses, party cellars, garden sheds and storage and production halls.The standard version of the HP glass radiant heaters can be controlled by an ON/OFF switch installed on site or a motion detector.For operation in compliance with eco-design guidelines and precise control of the room temperature, combine the HPGW radiant heater with our DE series wireless thermostat.Technical data:Dimensions: 26.7 x 9.5 x 17.1 cmVoltage: 1/N/PE 230 V Frequency: 50 Hz Protection class: IPX4 Area to be heated: 10-15 m² Technology: 1 ceramic radiator, 650 wattsConnection cable: 185 cmSchuko plug: YesInstallation height: from 1.80 mMounting: wall & ceiling